OMRON CJ2M-MD211 CJ2MMD211 PULSE INPUT OUTPUT PLC MODULE CPU UNIT NEW

Description

OMRON CJ2M-MD211 CJ2MMD211 PULSE INPUT OUTPUT PLC MODULE CPU UNIT NEW
Product Descriptio
n：
Increased performance, and increased memory capacity
Up to 40 I/O unit on any CPU
Pulse I/O Modules add position control functions to any CPU
USB for plug-and-play access to the PLC
All models available with or without Ethernet port
Choice of serial port plug-in modules
Specification:
Item
Description
Pulse I/O
Model of Pulse I/O
CJ2M-MD211 (Sinking-type)
Modules
CJ2M-MD212 (Sourcing-type )
External Interface
40-pin MIL connector
Pulse Inputs
Can be used as normal inputs, interrupt inputs, quick-response inputs, or high-speed
counter inputs.
(Function of each input must be selected in the PLC Setup.)
Input method: Line-driver input or 24-VDC input (selected by wiring)
Normal Inputs
20 max. (10 per Pulse I/O Module)
Input constants: Set in the PLC Setup (0, 0.5, 1, 2, 4, 8, 16, or 32 ms). Default: 8 ms
Interrupt Inputs and
8 max. (4 per Pulse I/O Module)
Quick-response
Input signal minimum ON pulse width: 30 µs
Inputs
High-speed Counter
4 max. (2 per Pulse I/O Module)
Inputs
Input method: Differential-phase (?) pulses, pulse + direction, up/down pulses, or
increment pulse
Maximum response frequency: 50 kHz for differential phases or 100 kHz for single
phase
Counting mode: Linear mode or circular (ring) mode
Count value: 32 bits
Counter reset: Phase Z + software reset or software reset
Control method: Target-value comparison or range comparison
Gate function: Supported
Pulse Outputs
Can be used as normal outputs, pulse outputs, or PWM outputs. (Function of each
output must be selected in the PLC Setup.)
Output method: Sinking or sourcing transistor outputs (The method is determined by
Pulse I/O Module model.)
Normal Outputs
12 max. (6 per Pulse I/O Module)
Pulse Outputs
4 max. (2 per Pulse I/O Module)
Output method: CW/CCW or pulse + direction (The method is determined by the I/O
wiring and the instructions used in the ladder program.)
Output frequency: 1 pps to 100 kpps (in increments of 1 pps)
Output Mode: Continuous mode (for speed control) or independent mode (for position
control)
Output pulses: Relative coordinates: 0000 0000 to 7FFF FFFF hex (0 to 2,147,483,647
pulses)
Absolute coordinates: 8000 0000 to 7FFF FFFF hex (-2,147,483,648 to 2,147,483,647)
Acceleration/deceleration curves: Linear or S-curve
Origin search function: Supported
PWM Outputs
4 max. (2 per Pulse I/O Module)
Output frequency: 0.1 to 6,553.5 Hz (in 0.1-Hz increments) or 1 to 32,800 Hz (in 1-Hz
increments)
Duty ratio: 0.0% to 100.0% (in 0.1% increments)
Package Included:
1 x OMRON CJ2M-MD211 CJ2MMD211 PULSE INPUT OUTPUT PLC MODULE CPU UNIT NEW