New KEYENCE FS-N11P FSN11P Sensor Amplifier Digital Fiber Optic Multichannel I/O

Description

New in Box Mitsubishi Q68DAV 8-Channel Digital-Analog Converter Output Module
Specification:
Model
FS-N11P
Type
Standard 1 output
I/O format
Cable
Main unit/expansion unit
Main unit
Number of inputs/outputs
Monitor output (1 to 5 V)
―
External input
Response time
50 μs (HIGH SPEED)/250 μs (FINE)/500 μs (TURBO)/1 ms (SUPER)/4 ms (ULTRA)/16 ms (MEGA)
Number of inputs/outputs
Control output
1 output
PNP open collector 24 V; 1 output max: 100 mA or less; 2 output total:
100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or less
Output toggle
Light-ON/Dark-ON switchable
Light source LED
Red 4-element LED (wavelength 630 nm)
Timer function
Timer OFF/OFF delay/ON delay/One-shot
APC
ON/OFF switchable (Factory setting： OFF)
Unit expansion
Up to 16 units can be connected total (two-output type is treated as two units)
Protection circuit
Reverse polarity protection, Over-current protection, Surge absorber
Number of interference prevention units
0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA
(When set to double, the number of interference-prevention units will be doubled.)
Case size
H30.3mm 1.19" x W9.8mm 0.39" x L71.8mm 2.38"
Rating
Power voltage
12 to 24 V DC ±10% ripple (P-P) 10% or less
Power consumption
Normal: 950 mW or less
(39 mA max. at 24 V, 52 mA max. at 12 V)*1
Eco on mode: 850 mW or less
(35 mA max. at 24 V, 44 mA max. at 12 V)*1
Eco Full mode: 520 mW or less
(21 mA max. at 24 V, 26 mA max. at 12 V)
Environmental resistance
Operating ambientluminance
Incandescent lamp: 20,000 lux or less, sunlight: 30,000 lux or less
Operating temperature range
-20 to +55°C -4 to 131°F (no freezing)*2
Operating ambient humidity
35 to 85% RH (No condensation)
Vibration
10 to 55 Hz, double amplitude 1.5 mm 0.06", 2 hours for each of X,Y,Z axis
Shock resistance
500 m/s2 3 times for each of X,Y,Z axis
Material
Case
Both main unit and expansion unit housing material: Polycarbonate
Weight
Approx 75 g
*1 Increases 100 mW (4.0 mA) for High Speed mode
*2 One or two more units connected: -20 to +55°C -4 to 131°F; 3 to 10 more units connected: -20 to +50°C -4 to 122°F; 11 to 16 more units connected: -20 to +45°C -4 to 113°F. When using
2-outputs, one unit is counted as two units.
All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting.
Package Included:
1 x  New KEYENCE FS-N11P FSN11P Sensor Amplifier Digital Fiber Optic Multichannel I/O