GRAB BAR weld on Handle Kit for Equipment, Trucks, Tractors, Ropes - Aluminum

Description

You will receive a three piece kit: Two steel weld on mounting ends and one 10-1/2 inch long x 1-1/2 inch diameter 6061 aluminum grab handle with a set screw at each end.
The weld on ends are 9/16 inch diameter steel bent at 90 degrees which you weld on to your surface as desired. These ends provide a 3 inch stand off from your surface (2-3/4 inch clearance between your surface and the inside of the aluminum handle).
All parts are raw and unpainted. Best practice is to degrease thoroughly and paint the ends that will be inserted into the handle prior to welding onto your surface. Then complete final touchup painting after welding.
Pros:
* Aluminum handle is knurled for good grip. Includes two 1/4-20 Allen set screws (one on each end) to help prevent the handle from spinning.
* Manufactured by Cascade Metal Works in Oregon, USA.
* Easily customized to your specifications - just send a message to seller!
Dimensions: Steel ends are 9/16 inch in diameter; knurled aluminum handle is 1-1/2 inches in diameter; overall length is 14 inches.